How to tint the back window on a Corvette C6 XPEL XR
Method 1: After placing your H pattern, lay your film down on the window with some excess. Once the film is tacked down, cut 4-6 inch relief cuts from the back corner of the window to about 3/4s of the way down towards the front doors. Then start shrinking with your heat gun, starting at the angles of the glass. Use your heat gun and card to get the film to stick cleanly and tightly around those corners. After both corners are shrunk, work your way from the top of the glass down, finishing just before your relief cuts. Once all the film is shrunk, cut off your excess and do any final touch shrinking.